Table of Contents
Advertisement
Installation
3. Grasp the cable connector by hand and
push the cable into the probe body until
you feel a click. The cable housing is fully
seated when it is flush with the edge of the
probe body.
4. To remove the tip, pull the cable tab straight
out from the probe body.
CAUTION.
Pull only on the cable tab when
removing the tip. You may damage the tip or
probe if you pull on the cables.
6
P7500 Series TriMode Probes Quick Start User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the TriMode P7500 Series and is the answer not in the manual?