Chapter 5
IP Phone registration
Ensure that you have loaded the appropriate BCM keycodes to activate the Nortel IP Phone 1200
series phones on your BCM system.
Navigation
•
"Determining the registration process" on page 37
•
"Registering the IP Phone (global registration with password)" on page 38
•
"Moving an IP Phone without changing the DN" on page 38
•
"Moving an IP Phone and changing the DN" on page 39
Determining the registration process
You register IP Phones in two-stages: setting up the system programming and choosing global or
automatic registration.
Procedure steps
Step
1
2
3
4
5
Action
Through the Business Element Manager, set up the system programming to
receive registration under Configuration > Resources >Telephony
Resources > IP Sets.
On the IP Terminal Global Settings panel, select Enable registration.
If you want to use a single password to configure and register the phone, select
Enable global registration.
In the Global password field, type a numeric password.
If you want the system to automatically assign DN records to the phones, select
Auto-assign DNs.
End
IP Phone 1200 Series Installation
37