Table of Contents
Advertisement
Chapter 2
Table 3 IP Phone 1210, 1220, and 1230 keys descriptions (Sheet 2 of 2)
Key or component
Navigation keys (with Enter
key)
Volume control keys
Mute key
Handsfree key
Goodbye (Release) key
Applications key
Headset key
Hold key
Keycap defaults
The keys on the IP Phone 1210, 1220, and 1230 can have one of two sets of keycaps: iconic or
textual. You can order your IP Phone 1210, 1220, and 1230 with one set of keycaps.
"Keycap defaults" (page 19)
Table 4 Keycap defaults (Sheet 1 of 2)
Function
Conference
Services
Quit
Description
Press the Navigation keys to scroll through menus and lists that appear
on the display screen. The outer part of this key cluster rocks for up,
down, left, and right movements.
Press the Enter key, at the center of the Navigation key cluster, to
confirm menu selections.
In most menus, you can press the Enter key instead of the Select soft
key.
Press the Volume control keys to adjust the volume of the ringer,
handset, headset, speaker, and the Handsfree feature. Press the top
button to increase the volume, and press the bottom button to decrease
volume.
Press the Mute key to listen to the receiving party without transmitting.
Press the Mute key again to return to two-way conversation. The Mute
LED indicator, on the Mute key, flashes to indicate that the microphone
is muted.
The Mute key applies to handsfree, handset, and headset microphones.
The microphone remains muted for your current call and all other calls
until you press the Mute key again to turn the microphone on.
Press the Handsfree key to activate handsfree. The Handsfree LED
indicator, on the Handsfree key, lights to indicate when handsfree is
active.
Press the Goodbye key to terminate an active call.
Press the Applications key to access external server applications.
Press the Headset key to answer a call using the headset or to switch a
call from the handset or handsfree to the headset. The Headset LED
indicator, on the Headset key, lights to indicate that the headset is in
use.
Press the Hold key to put an active call on hold. Press the flashing line
(DN) soft key to return to the caller on hold.
shows the two sets of keycaps available.
Iconic keycap
Textual keycap
Table 4
IP Phone 1200 Series Installation
19
Advertisement
Table of Contents
