22
Figure 6 Foot stand positions
Expansion modules for the IP Phone 1210, 1220, and 1230
This section provides information about the LCD Expansion Module:12-Key Self-Labeling and
the LED Expansion Module:18-Key Paper Label.
The LCD Expansion Module: 12-Key Self Labeling and LED Expansion Module: 18-Key
Paper Label are hardware accessories that connect to the IP Phone and provide additional
user-defined feature keys. The IP Phone 1220 and 1230 support the expansion modules.
Basic features
The expansion modules provide either 12 or 18 additional user-defined feature keys for your
IP Phone. You can place the IP Phone and expansion modules on your desktop or you can
wall-mount the IP Phone and expansion modules.
The feature keys only support lines when the expansion modules are running in enhanced mode.
When the expansion modules are booting up, you can clear the features that are programmed
into the line or feature keys by pressing the lower four line or feature keys, in sequence, from
bottom to top. The line or feature keys return to their default autodial settings.
You can add a maximum of seven LCD Expansion Module: 12-Key Self Labeling to an
IP Phone, or a maximum of five LED Expansion Module: 18-Key Paper Label. You cannot use
a combination of both expansion module types on a single IP Phone.
The following IP Phones support the expansion modules:
•
IP Phone 1220
•
IP Phone 1230
NN40050-302
Position 1 slots
(25-degree angle)
Position 2 slots
(55-degree angle)
Chapter 2
Bottom tabs