52
Chapter 9 IP Softphone 2050 Settings
To assign a manual IP address or DNS name, you must have the
following information about your call server
•
IP address or DNS name
•
Port number
•
Server type
To assign an IP address or DNS name
1
From the Server list, select the server you want to configure: Primary or Secondary.
2
Select IP and enter the IP address, or select Name and enter the DNS name.
3
From the Type list, select your server type.
The default port number shows in the Port text box.
4
If your server port number is different from the default number, enter the correct number in the
Port text box.
Restoring defaults
To restore the settings dialog to its default settings, click Restore Defaults.
Resetting the connection
To reset the server connection while the IP Softphone 2050 is running, click Reset.
Skin
Use the Skin dialog box to select the 1140 skin or one of two available compact skin colors (black
or silver). You can also use this dialog box to switch to the Accessibility Interface.
To choose the skin
1
From the Skin menu, select 1140, black, or silver.
2
Click OK.
If the default path was overwritten during installation, then you must designate the correct path to
the IP Softphone 2050 file.
NN40050-100
NN40050-100
Note: Symposium call center agents must select the Symposium check
box.