Table of Contents
Advertisement
6
Limitations
6.1
USB Type-C
By default, only a USB Type-C
refer to the technical application note and specific configuration.
6.2
Debug connector configuration
According to the board revision, an STDC14 or a MIPI10 connector is soldered onto the CN1 STDC14 footprint.
Refer to
Section 14.2 CN1 debug
UM2577 - Rev 2
®
V
limitation
BUS
®
V
nominal voltage of 5 V must be used. For any other V
BUS
connector.
UM2577
Limitations
nominal voltage,
BUS
page 7/54
Advertisement
Table of Contents
Need help?
Do you have a question about the B-G474E-DPOW1 and is the answer not in the manual?
Questions and answers