Features - STMicroelectronics B-G474E-DPOW1 Manual

1

Features

• STM32G474RET6 Arm
128 Kbytes of SRAM, in LQFP64 package
• USB Type-C
• RGB power LED for a bright lighting
• Digital power buck-boost converter with internal or external Input voltage and with onboard resistor loads
• Audio Class-D amplifier capable
• 4 user LEDs
• 3 LEDs for power and ST-LINK communication
• 4-direction joystick with a selection button
• Reset push-button
• Board connectors:
– USB Type-C
– USB Micro-B
– 2 x 32-pin header, 2.54 mm pitch, daughterboard extension connector for breadboard connection
• Flexible power-supply options: ST-LINK USB V
• On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
• Handled by STM32CubeMonitor-UCPD (STM32CubeMonUCPD) software tool
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2577 - Rev 2
® ®
Cortex -M4 core-based microcontroller, featuring 512 Kbytes of Flash memory and
®
with USB 2.0 FS interface compatible with USB-PD 3.0
®
®
, MDK-ARM, and STM32CubeIDE
®
or USB Type-C V or external source
BUS BUS
STM32CubeG4
UM2577
Features
MCU Package
page 2/54