Christie APS Series Setup Manual page 31

Important safety instructions (continued)
►Use only the accessories specified or recommended by the manufacturer.
►Do not modify
►Do not let any things or any liquids enter to the inside of the product.
►Do not get the product wet.
►Do not place the projector where any oils, such as cooking or machine oil,
are used. Oil may harm the product, resulting in malfunction, or falling from the
mounted position. Do not use adhesive such as threadlocker, lubricant and so
on.
►Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface
or the leaned table.
- Ensure the product is stable. Place the projector so that it does not protrude
from the surface where the projector is placed on.
- Remove all the attachments including the power cord and cables, from the
projector when carrying the projector.
►Do not look into the lens and the openings on the
source is on, since the projection ray may cause a trouble on your eyes.
►Do not approach the exhaust vents, while the light source is on. Also after the
light source goes out, do not approach them for a while, since too hot.
LWU650-APS/LWU530-APS
Setup Guide
the projector or accessories.
WARNING
3
projector while the light
020-001521-02 Rev. 1 (01-2019)
LIT GUID SET APS Series