Cleaning With The Sola-Tecs C - Cleantecs SOLA-TECS C Series Operating Instructions Manual

Working
The cleaning movement
Apply cleaner
Clean the entire surface
32

Cleaning with the Sola-Tecs C

� Guide the cleaner
from you and back towards you in linear,
even movements (similar to a sweeping
movement).
� Move the cleaner
direction and repeat the cleaning
movement.
� Repeat these two steps until you have
cleaned your surface.
� Switch off the high-pressure cleaner
after finishing cleaning work or during
breaks.
WARNING
Risk of injury from falling cleaner
�AWhen working at the edge of the work
area, be careful not to go too far over
the edge.
In this way you will avoid personal injury
and damage to property caused by a
falling cleaner.
WARNING
Danger of injury due to incorrect
guidance of the cleaning device
�ADo not move the SOLA brush and
SOLA-TECS C vertically upwards or
vertically downwards.
This will prevent injuries from a falling
cleaning device.
[8] vertically away
[8] in a horizontal
BA 0303788 R00 2019-03