Cleantecs SOLA-TECS C Series Operating Instructions Manual page 30

Working
Hold on to the lance
Place on cleaning surface
30
� Take the lance [1]
in your hand.
� Position yourself at the starting point
of the surface to be cleaned.
� Place the cleaner
point of the surface to be cleaned on the
photovoltaic modules [5].
Make sure that the working direction is
always from top to bottom or from bot-
tom to top. Never work from the side or
at an angle, otherwise the cleaner can
slip off!
WARNING
Risk of injury due to falling parts
�ACheck the area to be cleaned for
parts that can fall off.
This protects you from injuries caused
by falling parts.
WARNING
Risk of injury due to sudden start-up
�AStart and stop the machine only using
a suitable system and not using the
high-pressure cleaner.
This will protect you from injuries caused
by unintentional start-up.
with the Sola-Tecs C
[4] at the starting
BA 0303788 R00 2019-03