Preparation For Mounting The Cleaner; Removing The Transport Cap; Checking The Gearbox; Checking The High-Pressure Filter - Cleantecs SOLA-TECS C Series Operating Instructions Manual

Commissioning

Removing the transport cap

Checking the gearbox

24
Infobox
The following tool
is required.
Preparation for
mounting the
cleaner
In this step, the Sola-Tecs C is prepared
for installation.
Removing the transport cap
� Clamp the cleaner
thighs and pull the transport caps
upwards.
Risk of injury during disassembly
�AWear gloves during disassembly.
This will protect your skin from
abrasions and pinching.
Checking the gearbox
� Place the cleaner on a clean sur-
face and turn the brush onto one side.
The second side must turn with it. The
gearbox should not make any chopping
noises.

Checking the high-pressure filter

� Take the socket wrench [3]. Insert the
socket wrench into the connector pin
[4] until it is positioned on the HD filter.
[1] between your
[2]
CAUTION
BA 0303788 R00 2019-03