Safety When Cleaning; Checking And Preparing High-Pressure Equipment; Checking Lances For Damage - Cleantecs SOLA-TECS C Series Operating Instructions Manual

Working Safely

Safety when cleaning

� When cleaning, make sure that you do
not damage any components or lines.
WARNING
Electric shock due to defective
photovoltaics
�ACheck the modules for damage
(cracks, scratches, leaks, etc.)
prior to cleaning.
Damaged modules must not be cleaned.
There is a risk of injury due to electric
shock.
WARNING
Electric shock from photovoltaics
�ACables and components of
photovoltaic installations are always
live during incidence of light.
Touching live parts can lead to electric
shock and is prohibited.
Checking and preparing
high-pressure equipment
� Check the high pressure connections
for damage before starting work.
� Check the high-pressure hose for
damage before starting work.
22
CAUTION
Risk of injury from defective hoses and
connections
�ACheck all high-pressure hoses and
connections for damage.
This will protect you from being injured by
escaping hard water jets.
CAUTION
Risk of injury due to incorrect
installation of the joints
�AAlways hand-tighten and check the
connection points.
This will protect you from being injured
by connecting parts ying around
uncontrollably.

Checking lances for damage

� Check the clamp and end ring for
damage.
� Check the carbon rods for damage,
such as breaks or impact marks.
� Defective parts must be replaced
immediately.
WARNING
Risk of injury due to incorrect adjust-
ment of the bracket
�AThe bracket must always clamp with
suf cient force.
This prevents personal injury and damage
to property due to uncontrolled falling of
parts.
BA 0303788 R00 2019-03