IDA-1S
Users Manual
Product Maintenance
To prevent possible electrical shock, fire, or personal injury:
•
•
•
•
•
•
•
•
•
For safe operation and maintenance of the product:
•
•
•
After troubleshooting or maintenance, restart the Product and ensure it starts
without errors. (See Product Operation.)
18
Batteries contain hazardous chemicals that can cause burns
or explode. If exposure to chemicals occurs, clean with
water and get medical aid.
Do not disassemble the battery.
Do not disassemble or crush battery cells and battery
packs.
Do not put battery cells and battery packs near heat or fire.
Do not put in sunlight.
Do not short the battery terminals together.
Do not keep cells or batteries in a container where the
terminals can be shorted.
Remove the input signals before you clean the Product.
Use only specified replacement parts.
Have an approved technician repair the Product.
Repair the Product before use if the battery leaks.
Be sure that the battery polarity is correct to prevent battery
leakage.
Use only Fluke approved power adapters to charge the
battery.
Warning