Safety Information - Avalue Technology Medi-View AID-185 Quick Reference Manual

5.2 Safety information

General recommendations
Read the safety and operating instructions before operating the device. Retain safety and operating instructions
for future reference.
Adhere to all warnings on the device and in the operating instructions manual. Follow
all instructions for operation and use.
Electrical Shock
•
Do not modify this equipment without authorization of the manufacturer.
•
No user-serviceable part inside. The equipment should be opened only by qualified service personnel.
Safety instructions
•
The equipment must be powered using the delivered medical approved DC power supply only.
•
The medical approved DC power supply must be powered by the AC mains voltage (protective earth
terminal).
1. To avoid the risk of electric shock, this equipment must only be connected to a
supply mains with protective earth.
2. Caution: This adaptor EDAC/EM11013C is a forming part of the medical device
•
Make sure the voltage of the power source is correct before connecting the equipment to the power
outlet.
•
Position the power cord so that it is not a hazard. Do not place anything over the power cord.
•
If the equipment is out of use for an extended period, make sure to disconnect it from the power source
to avoid damage in the event of a power surge.
•
Earth the Medi-View 1 by connecting the protective earth pin to a grounded outlet by means of the
sup- plied wire.
•
If one of the following situations arises, ensure you get the equipment checked by service personnel:
a) The power cord or plug is damaged.
b) The equipment has been exposed to moisture.
c) The equipment is not functioning properly, or you cannot get it to work according to the user manual.
d) The equipment has been dropped and damaged.
e) The equipment has obvious signs of breakage.
•
To disconnect the device: Remove the rear power supply power connection.
•
If your computer is losing time or the BIOS configuration resets to default settings, the battery most
likely has no power.
•
Do not replace the battery yourself.
Medi-View. The Medi-View is provided with a battery-powered real-time clock circuit. There is a
danger of leakage or explosion if the battery is incorrectly replaced. Replace only with same or
equivalent type recommended by the manufacturer. Discard used batteries according to the
manufacturer's instructions.
•
Place the terminal on a stable surface that can support the weight of at least 4 terminals or hang from
a reliable structure during installation. Dropping the equipment is likely to cause serious injury to a
child or adult, and serious damage to the equipment.
•
Improper installation of VESA mounting can result in serious personal injury! Use a VESA mounting
Please contact a qualified technician or your supplier of the
Medi-View AID-185 Quick Reference Guide 19
Quick Reference Guide