Page 2
AID-240SBW Quick Reference Guide Instructions for the User The document combines text and illustrations, providing a comprehensive overview of the system. The information is presented as a sequential steps of actions, allowing the user to learn directly how to use the device.
Page 3
AID-240SBW Quick Reference Guide Warning! Because of the danger of electric shock, never remove the cover of a device while it is in operation or connected to a power outlet. 4. If one of the following situations arises, get the equipment checked by service personnel: The power cord or plug is damaged.
Page 4
AID-240SBW Quick Reference Guide 7. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet. Position the power cord so that people cannot step on it. Do not place anything over the power cord. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over voltage.
Page 5
AID-240SBW Quick Reference Guide Collateral standard: Safety requirements for Medical electrical systems – EN 60601-1-2 (IEC 60601-1-2) Medical electrical equipment Part 1-2: General requirements for safety Collateral standard: Electromagnetic compatibility; Requirements and tests 14. Accessory equipment connected to the analog and digital interfaces must be in compliance with the respective nationally harmonized IEC standards (i.e.
Page 6
AID-240SBW Quick Reference Guide Warning! To avoid risk of electric shock, this equipment must only be connected to a supply main with protective earth. Caution! This adapter EDAC EM11013C is a forming part of the medical device. Explanation of Graphical Symbols IEC 60878 and ISO 3864-B.3.6 : Warning: dangerous voltage...
Page 7
AID-240SBW Quick Reference Guide Federal Communication Commission Interference Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Page 8
AID-240SBW Quick Reference Guide FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
AID-240SBW Quick Reference Guide 1. AID-240SBW Multi Touch Panel PC Features ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ In this chapter, you will get to know all features of our AID-240SBW Multi Touch Panel PC. 1.1 Specifications 1.2 Front view 1.3 Rear & Bottom view AID-240SBW Quick Reference Guide...
Touch Panel PC and how to connect different cables. If you have Internet ISP information or network setting, you will be able to setup the AID-240SBW Multi Touch Panel PC to connect to the internet or network. 2.1 VESA Mounting 2.2 Cleaning and Disinfecting...
PC into their system. Never use mounting brackets except as provided by Avalue to prevent unreliable mounting of the AID-240SBW. VESA mount installation should be carried out by a professional technician; please contact a service technician or your retailer if you need this service.
Page 17
AID-240SBW Quick Reference Guide Suggested Screw type for mounting Note: 4 pieces of M4 x 6mm screws (P/N: E1933050611R) Warning! Use suitable mounting apparatus to avoid risk of injury. AID-240SBW Quick Reference Guide...
AID-240SBW Quick Reference Guide 2.2 Cabling 1. Power Cable 2. Ethernet (RJ-45) Cable Power Jack Ethernet (RJ-45) Connector AID-240SBW Quick Reference Guide...
Page 19
AID-240SBW Quick Reference Guide Please follow below steps to connect power cable to system. The AID-240SBW could only be powered by a DC power adapter (EDAC Model no. EM11013C). Be sure to always handle the power cords by holding the plug ends only.
Page 20
AID-240SBW Quick Reference Guide 2.3 Cleaning and Disinfecting Cleaning Instructions 1. Turn off the computer before starting clean up. This way, you can see any dirt on the screen; the brightness of the monitor may make you miss some areas.
AID-240SBW Quick Reference Guide 3. Using AID-240SBW Multi Touch Panel PCs ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ This chapter describes in detail all features of AID-240SBW Multi Touch Panel PC. Turn ON/OFF the System Using LCD Display and Touch Screen AID-240SBW Quick Reference Guide...
AID-240SBW Quick Reference Guide 3.1. Turn ON/OFF the System ON/OFF Touch Button 3.1.1 Turn ON the System 1. Check if the Power ON/OFF LED light is red. 2. Press the Power ON/OFF icon firmly to turn power ON/OFF 3. The Power ON/OFF LED will turn green to indicate power is on.
AID-240SBW Quick Reference Guide 3.2 Using LCD Display and Touch Screen Control Buttons 3.2.1 Adjust System Volume 1. Press the Volume Up or Volume Down icon to increase or decrease volume 2. The volume will be adjusted accordingly. 3.2.2 Adjust LCD Display Brightness 1.
AID-240SBW Quick Reference Guide 4. AID-240BSW Disassembly Figure ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ In this chapter, you will learn to disassemble the AID-240BSW. Please perform these steps with care. ▲ WARNING: Turn OFF the system and disconnect the power cable before performing the following tasks.
AID-240SBW Quick Reference Guide 4.1 Disassembly Figure Remove 7 screws to release the chassis cover, and remove it. Remove 21 screws from the case to take off the top chassis. End of This Document Thank you for purchasing and using AID-240BSW Multi Touch Panel PCs.