Body Pack Transmitter - PROEL RMW10 Manual

RMW10

Body Pack Transmitter

1. Display
LCD displays : antenna symbol ( when TX and RX are couplet), operating frequency, charge battery level, CHANNEL, GROUP,
power transmission (PL), LOCK.
2. CH/ON
Press for one second to switch on the Transmitter. Transmitter displays the current frequency, the battery charge level. Press
newly to pass in a cyclic mode to the following functions: CHANNEL - GROUP - PL - LOCK / UNLOCK. To disable the transmitter
press and keep pressing for one second.
3. SELECT
Functions mode allows value selection.
4. Jack for battery recharge purposes
To charge rechargeable batteries, connect the battery charter (optional) to this jack input.
5. Mini 4P connector
Connect the clip microphone and headset to this connector: guitar, bass keyboard etc .. .can be connected to this input.
6. Battery compartment
Open the battery housing and insert two AA 1,5V batteries or rechargeable batteries i (optional) respecting the polarity.
7. Clip
8. Antenna
In case such antenna is covered (by hands for example), the signal can be attenuated with the possibility of signal loss or noise.
19
Pin 1: massa
Pin 2: + 5 V
Pin 3: Audio
Pin 4: