RMW8
d) Body Pack Transmitter WHL
1. Display
LCD displays: antenna symbol (when TX and RX are couplet), operating frequency, charge battery level, CHANNEL, power transmission
(PL), LOCK
2. CH/ON
Pressing for one second to switch on the transmitter. The transmitter displays the current frequency, the battery charge level. Press again to
pass in a cyclic mode the following functions: CHANNEL / PL / LOCK. To disable the transmitter press and keep pressing for one second
3. SELECT
Functions mode allows value selection.
4. Jack for battery recharge purposes
To charge rechargeable batteries, connect the battery charger (optional) to this jack input.
5. Mini 4P connector
Connect the clip microphone and headset to this connector: guitar, bass, keyboard etc ... can be connected to this input.
6. Battery compartment
Open the battery housing and insert 2 batteries AA 1,5V or rechargeable batteries (optional) respecting the polarity.
7. Clip
8. Antenna
If the antenna is covered (by hands for example), the signal can be attenuated with the possibility of signal loss or noise.
19
Pin 1:
massa
Pin 2:
+ 5 V
Pin 3:
Audio
Pin 4: