Toyota Hiace Owner's Manual page 80

78
1-2. Child safety
Compatibility of each seating
■
position with child restraint
systems
*1, 2, 3
Suitable for "universal" category
child restraint system fixed with
the seat belt.
Suitable for child restraint sys-
tems given on recommended
child restraint systems and
compatibility table (P.79).
Not suitable for child restraint
system.
Never use a rear-facing child
restraint system on the front
passenger seat.
*1
: Move the front seat fully rearward. If
the passenger seat height can be
Detail information for child restraint systems installation
■
Seat position number
Seating position suitable for universal belted (Yes/No)
i-Size seating position (Yes/No)
Seating position suitable for lateral fixture (L1/L2/No)
adjusted, move it to the upper most
position.
*2
: Adjust the seatback angle to the
most upright position. When install-
ing a forward-facing child seat, if
there is a gap between the child seat
and the seatback, adjust the seat-
back angle until good contact is
achieved.
*4
*3
: If the head restraint interferes with
your child restraint system, and the
head restraint can be removed,
remove the head restraint.
Otherwise, put the head restraint in
the upper most position.
*4
: Use only a front-facing child restraint
system.
Seating position
Yes
Forward-facing only
No
No