Toyota Hiace Owner's Manual page 350

348
4-5. Using the driving support systems
System components
A
Multi-information display
Turn the Blind Spot Monitor on/off.
B
Outside rear view mirror indica-
tors
When a vehicle is detected in a blind
spot of the outside rear view mirrors,
the outside rear view mirror indicator on
the detected side will illuminate. If the
turn signal lever is operated toward the
detected side, the outside rear view
mirror indicator will flash.
C "BSM" indicator
When the Blind Spot Monitor is
enabled, the indicator illuminates.
■ Certification

For vehicles sold in Singapore
Turning the Blind Spot Moni-
tor on/off
The Blind Spot Monitor can be
enabled/disabled on
the multi-information display.
(P.675)
■ Outside rear view mirror indicators
visibility
In strong sunlight, the outside rear view
mirror indicator may be difficult to see.
■ When "Blind Spot Monitor Unavail-
able" is shown on the multi-infor-
mation display
The sensor voltage has become abnor-
mal, or water, snow, mud, etc., may be
built up in the vicinity of the sensor area
above the rear bumper. (P.350)
Removing the water, snow, mud, etc.,
from the vicinity of the sensor area
should return it to normal.
Also, the sensor may not function nor-
mally when used in extremely hot or
cold weather.
■ When "Blind Spot Monitor Malfunc-
tion Visit Your Dealer" is shown on
the multi-information display
There may be a sensor malfunction or
misaligned. Have the vehicle inspected
by your Toyota dealer.
■
Customization
Some functions can be customized.
(P.682)
screen of