using a soft dry cloth.
Cleaning the camera
■
If the camera lens is dirty or cov-
ered with foreign matter, such as
water droplets, snow, mud, etc., the
displayed image may not be clear.
In this case, rinse the camera lens
with a large quantity of water and
then wipe it clean with a soft cloth
dampened with water.
Dirt on the camera lens can be
cleaned by operating the dedicated
camera cleaning washer. (P.303,
306)
■
The camera
The camera for the Digital Rear-view
Mirror is located as shown.
■
Cleaning the camera with washer
fluid
●
When cleaning the camera, it may be
difficult to see the image due to the
washer fluid. Therefore, take care in
the surrounding area while driving.
●
If washer fluid remains on the camera
lens surface after cleaning, the image
may be difficult to see at night due to
the height or inclination of the head-
lights of the vehicle behind. In this
case, change to optical mirror mode.
●
Some dirts may not be removed com-
pletely after cleaning. In this case,
rinse the camera lens with a large
quantity of water and then wipe it
clean with a soft cloth dampened with
3-4. Adjusting the steering wheel and mirrors
water.
●
Washer fluid is sprayed onto the cam-
era lens surface. Therefore, the ice,
snow, etc. adhering around the cam-
era cannot be removed.
NOTICE
■
To prevent the Digital Rear-view
Mirror from malfunctioning
Do not remove, disassemble or mod-
ify the mirror.
■
To prevent the camera from mal-
functioning
●
Observe the following precautions,
otherwise the Digital Rear-view Mir-
ror may not operate properly.
• Do not strike or hit the camera or
subject it to a strong impact, as the
camera installation position and
angle may be changed.
• Do not remove, disassemble or
modify the camera.
• When washing the camera, rinse it
with a large quantity of water and
then wipe it clean with a soft cloth
dampened with water.
Do not strongly rub the camera
lens, as it may be scratched and
will not be able to transmit a clear
image.
• Do not allow organic solvent, car
wax, window cleaner or glass coat
to adhere to the camera cover. If
this happens, wipe it off as soon as
possible.
• Do not apply hot water to the cam-
era in cold weather, as the sudden
change of temperature may cause
the camera to not operate properly.
• When using a high pressure
washer to wash the vehicle, do not
directly spray the camera and its
surrounding area, as doing so may
cause the camera to not operate
properly.
251
3