Toyota Hiace Owner's Manual page 335

Hide thumbs Also See for Hiace:
Table of Contents

Advertisement

the sign display will be empha-
sized and a buzzer will sound.
 When the RSA system recog-
nizes a no-entry sign and detects
that the vehicle has entered a
no-entry area based on the map
information of the navigation sys-
tem, the no-entry sign flashes
and a buzzer will sound. (For
vehicles with navigation system)
 If it is detected that your vehicle
is overtaking when a no overtak-
ing sign is displayed on the multi-
information display, the dis-
played sign will flash and a steer-
ing wheel will vibrate.
Depending on the situation, traffic
environment (traffic direction,
speed unit) may be detected incor-
rectly and a warning indication may
not operate properly.
Setting procedure
P.675
Automatic turn-off of RSA sign dis-
play
One or more signs automatically turn off
in the following situations.
A new sign is not recognized for a cer-
tain distance.
The road changes due to a left or right
turn, etc.
Conditions in which the function
may not operate or detect correctly
In the following situations, RSA does not
operate normally and may not recognize
signs, display the incorrect sign, etc.
However, this does not indicate a mal-
function.
The front camera is misaligned due to
a strong impact being applied to the
4-5. Using the driving support systems
sensor, etc.
Dirt, snow, stickers, etc. are on the
windshield near the front camera.
In inclement weather such as heavy
rain, fog, snow or sand storms
Light from an oncoming vehicle, the
sun, etc. enters the front camera.
The sign is dirty, faded, tilted or bent,
and if an electronic sign, the contrast
is poor.
All or part of the sign is hidden by the
leaves of a tree, a pole, etc.
The sign is only visible to the front
camera for a short amount of time.
The driving scene (turning, lane
change, etc.) is judged incorrectly.
Even if it is a sign not appropriate for
the currently traveled lane, such a
sign exists directly after a freeway
branches, or in an adjacent lane just
before merging.
Stickers are attached to the rear of the
preceding vehicle.
A sign resembling a system compati-
ble sign is recognized.
Side road speed signs may be
detected and displayed (if positioned
in sight of the front camera) while the
vehicle is traveling on the main road.
Roundabout exit road speed signs
may be detected and displayed (if
positioned in sight of the front camera)
while traveling on a roundabout.
The front of the vehicle is raised or
lowered due to the carried load.
The surrounding brightness is not suf-
ficient or changes suddenly.
When a sign intended for trucks, etc.
is recognized.
The vehicle is driven in a country with
a different direction of traffic.
The navigation system map data is
old.
The navigation system is not operat-
ing.
333
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Granvia

Table of Contents