WARNING
●
As the range of the image displayed
by the Digital Rear-view Mirror is
different from that of the optical mir-
ror, make sure to check this differ-
ence before driving.
System components
A
Camera indicator
Indicates that the camera is operating
normally.
B
Icon display area
Displays icons, etc. (P.248)
C
"MENU" button
Press to display the icons or select an
item.
D
Select button
Press to move the cursor or adjust the
image.
E
Lever
Operate to change between digital mir-
ror mode and optical mirror mode.
Changing modes
Operate the lever to change
between digital mirror mode and
optical mirror mode.
3-4. Adjusting the steering wheel and mirrors
1
Digital mirror mode
Displays an image of the area behind
the vehicle.
will illuminate in this mode.
2
Optical mirror mode
Turns off the display of the Digital Rear-
view Mirror allows it to be used as an
optical mirror.
■
Digital mirror mode operating con-
dition
The engine switch is turned to ON
When the engine switch is changed
from ON to OFF or ACC, the image will
disappear after several seconds.
■
When using the Digital Rear-view
Mirror in digital mirror mode
●
If it is difficult to see the displayed
image due to light reflected off the
Digital Rear-view Mirror, the camera
being dirty or covered with water drop-
lets, snow, etc., or if lights of a vehicle
behind your vehicle or the displayed
image are bothering you, change to
optical mirror mode.
●
When the back door is open, the Digi-
tal Rear-view Mirror image may not
display properly. Before driving, make
sure the back door is closed.
●
Any of the following conditions may
occur when driving in the dark, such
as at night. None of them indicates
that a malfunction has occurred.
• Colors of objects in the displayed
247
3