Toyota Hiace Owner's Manual page 53

2 When fixing the belt, in the order
of plate A and then plate
insert the plate into the buckle
until a clicking sound is heard.
A Plate A
B Plate B
C Buckle
*
: See "Checking your vehicle's model"
if you are not sure of which model
your vehicle is. (P.9)
WARNING
■ When using the outboard rear
seat belt (van [vehicles with rear
seats])
Do not use the outboard rear seat belt
with either buckle released. Fastening
only one of the buckles may result in
death or serious injury in case of sud-
den braking or a collision. (P.50)
Adjusting the length of the
B ,
belt (2-point type seat belt)
1 Lengthen
2 Shorten
Adjusting the seat belt
shoulder anchor height (out-
board front seats [except
center seat
*
: If equipped
1 Push the seat belt shoulder
anchor down while pulling the
lock release knob
2 Push the seat belt shoulder
anchor up.
Move the height adjuster up and down
as needed until you hear a click.
1-1. For safe use
*
])
A .
51
1