Toyota Hiace Owner's Manual page 239

pressing the lock release button
A .
If the head restraint touches the ceiling,
making the removal difficult, change the
seat height (if equipped) or angle.
*

Wagon (except rear power
seats)
Pull the head restraint up while
pressing the lock release button
A
.
If the head restraint touches the ceiling,
making the removal difficult, change the
seat height (if equipped) or angle.
*
 Wagon (rear power seats)
1 Pull the head restraint to the
uppermost position while press-
3-3. Adjusting the seats
ing the lock release button (right
side) A .
2 Pull the head restraint up while
pressing the removal button (left
side) A to remove the head
restraint.
If the head restraint touches the ceiling,
making the removal difficult, change the
seat angle.
*
: See "Checking your vehicle's model"
if you are not sure of which model
your vehicle is. (P.9)
Installing the head restraints
*
 Van and commuter
Align the head restraint with the
installation holes and push it down
to the lock position.
Press and hold the lock release
button A when lowering the head
237
3
*