Dji Zenmuse X3 Gimbal And Camera - dji MATRICE 600 PRO User Manual

DJI Zenmuse X3 Gimbal and Camera

Camera
Camera Profile
The X3 gimbal and camera can record up to 4K 4096×2160p video at 24 fps, and capture
12-megapixel images. It features a 1/2.3" Sony EXMOR CMOS image sensor. Preview of the camera's
POV in the DJI GO app before shooting images and video. Have extra options to shoot stills in burst
mode or self-timer mode, and export video in either MOV or MP4 format.
Camera Micro SD Card Slot
To store your photos and videos, plug in the Micro SD card into the Micro SD card slot on the gimbal
before powering on the Matrice 600 Pro. The camera supports a single Micro SD card of up to 64GB.
A UHS-1 type Micro SD card is recommended because of its fast read and write capability, allowing
you to store high-resolution video files.
DO NOT remove the Micro SD card from the gimbal when it is powered on.
Camera Data Port
Power on the Matrice 600 Pro and then connect a USB cable to the Camera Data Port to download
photos or videos from the camera to your PC.
Power on the aircraft before downloading the files.
Camera Operation
Use the Shutter and Record button on the remote controller to shoot images or the videos through the DJI
GO app. For more information on how to use these buttons, refer to Controlling the Camera (p. 17).
ND Filter
Attach an ND filter to the front of the camera to reduce over exposure and the 'jello' effect.
MATRICE 600 PRO User Manual
©
2017 DJI All Rights Reserved.
57