dji Matrice 600 Pro Quick Reference Manual
Hide thumbs
Also See for Matrice 600 Pro:
- User manual (110 pages) ,
- Disclaimer and safety manuallines (71 pages) ,
- Quick start manual (51 pages)
Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for dji Matrice 600 Pro
Summary of Contents for dji Matrice 600 Pro
- Page 1 DJI Matrice 600 Pro Quick Reference Guide Revised 07/20/21 ZM / CW...
- Page 2 Pre-Departure Prep and Packing List IN LAB Environment Checks 1. Determine location and duration of flight 2. Determine altitude and overlap settings of flight 3. Assess weather for flight location – IF POOR CONDITIONS, DO NOT FLY 4. Check TFRs and NOTAMs. 5.
- Page 3 12. Both Zenmuse XT2 MicroSD Cards cleared Do Not Delete XT2_UPGRADE_LOG.txt 13. Return all SD Cards to respective sensors/case Vehicle Readiness Checks 14. Visually and tactilely inspect for any abnormalities to platform a. Take M600 out of case Extend and lock top antennae, remove landing gear, remove top foam layer, pick up M600 by rotor arm base, stand on motor bells (BE CAREFUL) b.
- Page 4 M600 Case 19. Fold all rotor arms down and place in case with Sony A6000 facing rear 20. Replace top roam layer 21. Replace all landing gear 22. Fold GPS antennae down 23. Ensure top foam layer contains the following: a.
- Page 5 Matrice 600 ppk ❖ -Data out ❖ -Time out ❖ -PIC Name ❖ -Equip and Flight Location; ➢ Location ➢ M600 ➢ Sony A6000 ➢ XT2 ➢ PPK ➢ Launch pad FINAL DEPARTURE PACKING LIST - DO NOT LEAVE CAMPUS WITHOUT THE FOLLOWING: •...
- Page 6 9. Plan mission (in Pix4D Capture) a. Set flight area 8. Check PPK battery voltage with voltage- b. Set sensor type to DJI checker (12-12.6v) and strap PPK battery Zenmuse XT2 13mm on PPK body c. Frontlap/Sidelap set to same 9.
- Page 7 b. Shutter speed is set to 1/2500 sec or faster c. Aperture is set to F/3.5 d. Zoom set to ∞ e. ISO is set to AUTO NOT ISO MULTI NR f. Format SD Card on first flight g. Reset numbering system on first flight 20.
- Page 8 1. Fold in propeller blades and replace prop covers a. Ensure zipper is on the bottom side of propeller arms as to not damage propellers 2. Unplug and remove PPK a. Put back into case b. Remove MicroSD Card and check contents Open log file and note number of events Replace MicroSD Card into PPK 3.
- Page 9 PIC Responsibilities VOs Responsibilities 1. Put all M600 batteries 1. VOs pull all SD cards without a full charge a. Take note of which SD card goes where 2. Upload the data to “M600_PPK” folder back on charger following the “0_Templates” folder (located in 2.
Need help?
Do you have a question about the Matrice 600 Pro and is the answer not in the manual?
Questions and answers