SRP-Q200 3. Specifications CATEGORIES FEATURE IMPLEMENTATION Interface 10/100 Base-T All in one(Auto detection) Specification Protocol DHCP Client, HTTP, ARP, ICMP, IPv4, TCP, UDP Operation Mode Infrastructure, Soft AP, Ad-hoc, Wi-Fi Direct Wireless IEEE 802.11b/g/n, IEEE 802.11a/b/g/n Standard Range Up to 100m free space (Outdoor)
SRP-Q200 4. How to Connect WLAN can be configured through the printer’s WLAN interface. Likewise, WLAN can also be configured though the printer’s USB interface. 4-1 Connecting Printer 4-1-1 USB cable Connect USB cable to Printer, PC device. Use the “Net Configuration Tool” to adjust the settings.
SRP-Q200 4-2 Checking Network Setting 4-2-1 LAN and Wireless(WLAN) Cover Open Lever FEED Button After the printer has finished booting, open the printer cover and press and hold the FEED Button. This will cause the interface setting confirmation mode. Then add the paper, close the cover, and check that the following message is printed.
SRP-Q200 4-2-2 LAN Setting Values Classification Item Description Input Range Inactivity Time TCP connection hold time 0~3600 integer IP Assignment IP Assignment Method DHCP/Manual Method Network IP Address Printer IP IP Address Subnet Mask Subnet mask IP Address Gateway Default Gateway...
SRP-Q200 4-2-3 WLAN Setting Values Classification Item Description Input Range Home WLAN setting status display Network Mode Wireless LAN operating mode Infrastructure/Adhoc Channel when creating Adhoc Adhoc Channel 1~14 network SSID ID of the AP to connect 1~32 letters Inactivity Time...
SRP-Q200 4-3 Android Soft AP mode 1) Select “Wi-Fi”. 2) Select the printer to connect. 3) Select “CONNECT”. 4) Wi-Fi communication is available - 9 - Ver. 1.00...
SRP-Q200 4-4 iOS Soft AP mode 1) Select “Wi-Fi”. 2) Wi-Fi ON and Select the printer to connect. 3) Wi-Fi communication is available. - 10 - Ver. 1.00...
SRP-Q200 4-5 How to change Infrastructure mode 1) Enter the IP address of the printer in the address bar, and the following login window will pop up. Enter the ID and Password set for the printer, and then click [LOG IN] (Default User Name: admin, Password: password) 2) Select “Wireless”...
Page 12
SRP-Q200 3) Select “Infrastructure”, and set SSID, WLAN Security Type. 4) Reboot the Printer. - 12 - Ver. 1.00...
Operating systems that allow you to use the Windows printer driver are Windows, XP, Server 2003, VISTA, 2008 Server, 7, 8, 10. You can download the latest version of Windows driver from our Note home page. (www.bixolon.com) 1) Double-click the Windows Driver installation file. 2) Click Install. - 13 -...
Page 14
SRP-Q200 3) Select Installation and click Next.. 4) Select Model Name and click Next. - 14 - Ver. 1.00...
Page 15
SRP-Q200 5) Select Ethernet and click Add TCP/IP Port. 6) Enter the IP address and port number, and then click Next. - 15 - Ver. 1.00...
Page 18
SRP-Q200 11) Open the printer properties window in the Windows OS. (1) Installing on Windows XP / Server 2003 ※ Control Panel – Printers and Faxes. (2) Installing on Windows VISTA / Server 2008 / 7 / 8 / Server 2012 / 10 ※...
Page 19
SRP-Q200 14) Click Print Test Page and check printing status. Proper installation of the driver is indicated if the test page is printed normally. - 19 - Ver. 1.00...
SRP-Q200 6. Factory Reset 6-1 Initializing WLAN Setting Cover Open Lever FEED Button After the printer has finished booting, open the printer cover and press and hold the FEED Button for 5 seconds. This will cause the interface setting confirmation mode. Then add the paper, close the cover, and check that the following message is printed.
SRP-Q200 WLAN Factory Reset OK! Reboot Printer. After the above message is printed, the printer will automatically reboot. 6-2 Factory Reset Values Inactivity time IP Assignment Network Automatic(DHCP) Method Local Port 9100 Printer Name *Printer model Printer Port Num 9100...
SRP-Q200 7. Troubleshooting - IP Address Check the band of the IP Address. Check whether the bands of the Check network printer and the AP (or wireless terminals) are the same. setting The first three digits of the four digit value of the IP address must be (Refer to the same.
Page 23
SRP-Q200 When you see “Request timed out.” as shown below, it means that there is no collision. The corresponding IP can be used. On the other hand, if there is a reply as shown below, then the corresponding IP is used by another network terminal and it cannot be used for the printer IP.
Page 24
It is strictly prohibited to copy, store, and transmit the whole or any part of the manual and any property of the product without the prior written approval of BIXOLON Co., Ltd. The information contained herein is designed only for use with this BIXOLON product.