Self Record Using The Remote Control (Setting The Self Timer) - Samsung VP-D391 User Manual

SELF RECORD USING THE REMOTE CONTROL (SETTING THE SELF TIMER)

(VP-D392( i )/D395i only)
•
The SELF TIMER function works only in Camera mode. ➥page 18
•
When you use the SELF TIMER function on the remote control, the recording begins automatically in 10 seconds.
1. Set the Select switch to TAPE. (VP-D395i only)
2. Press the MODE button to set Camera (
3. Press the SELF TIMER button.
•
The ( ) indicator is displayed.
4. To record movie images, press the Recording start/stop button.
•
Self timer starts counting down from 10. At this moment, recording indicator
blinks with a beep sound.
•
At the last second of the countdown, recording starts automatically.
•
If you want to cancel the self timer function before recording, press the
SELF TIMER button again.
•
Do not obstruct the remote control sensor by putting obstacles between
the remote control and miniDV camcorder.
•
The remote control maximum range is 4 to 5m (13 to17 ft).
•
The effective remote control angle is up to 30 degrees left /right from the
centre line.
•
Using a tripod (not supplied) is recommended during self record.
).
MODE
CARD TAPE
(VP-D395i only)
BATT .
STBY STBY SP 0:00:30 0:00:30
10Sec 10Sec
16:9 Wide 16:9 Wide
10Sec 10Sec
S
C.Nite 1/30 C.Nite 1/30
English _39
60min 60min
16Bit 16BIt