COPYING A CAMCORDER TAPE ONTO A VIDEO TAPE
•
The copying function works only in Player Mode.
•
Connect your camcorder to a VCR using the AV jack to copy the recording from a camcorder tape onto a VCR tape.
•
Set the "AV In/Out" to "Out" before copying to an external device. (VP-D391i/D392i/D395i only)
1. Insert the tape you want to copy in your
camcorder.
2. Set the Select switch to TAPE.
(VP-D395i only).
3. Press the MODE button to set
Player (
).
4. Insert a new video tape in your VCR.
5. Connect the camcorder to your VCR with
the Audio/Video cable.
•
Connect the Audio/Video cable to the
input jack on your VCR.
•
The yellow jack: Video
•
The white jack: Audio(L)-mono
•
The red jack: Audio(R)
6. Press the Record button on your VCR to start recording.
7. Play the tape on your camcorder. Please refer to page 70 to see how to play a tape.
•
if you do not want to copy the screen display, set the "TV Display" to "Off" in the menu.
When Copying is Complete:
Stop recording on your VCR, then move down the Joystick (▼) on your camcorder.
•
If you operate the camcorder while connected to another device, always connect the camcorder to an AC
outlet using the AC power adapter.
•
You can also copy images to other external storage media using this camcorder.
➥
page 18
VCR
➥
page 68
Camcorder
AV
DV
MODE
POWER
CHG
Signal flow
Audio/Video Cable
➥
page 33
AV Jack
English _71