Samsung VP-D391 User Manual page 54

advanced recording
Settings
Auto This option is generally used to control the white balance automatically.
This controls the white balance according to the outdoor ambience, especially for
Daylight
close up and when the subject is of one dominant colour.
Cloudy This option is used when you make a recording in cloudy weather.
Fluorescent
This option is used when you make a recording under white fl uorescent lights.
Tungsten This option is used when the surroundings are less than 3200K of tungsten lights.
Custom WB You can manually adjust white balance to match the light source or situation
Setting the white balance manually :
1. Select "Custom WB".
•
The indicator (
2. Frame a white object such as a piece of paper so that it fi lls the screen.
Use an object that is not transparent.
•
If the object that fi lls the screen is not focussed, correct the focus using
"Manual Focus"
3. Press the Joystick.
•
The white balance setting will be applied and indicator (
•
The White Balance function will not operate in EASY.Q mode.
•
It is recommended that you specify "Digital Zoom" to "Off" before
setting white balance. ➥page 57
•
Reset the white balance if lighting conditions change.
•
During normal outdoor recording, setting to Auto may provide better results.
•
Pressing the MENU button while setting the Custom WB will cancel the
Custom WB setting and sets the White Balance to "Auto".
50_ English
) and the message "Set white balance" are displayed.
➥
page 42
Contents
) is displayed.
On-screen
display
White thick
paper
ME NU
W
T
B AT
T.
0:00:30 0:00:30
STBY STBY SP
10Sec 10Sec
16:9 Wide 16:9 Wide Art Art
S
C.Nite 1/30 C.Nite 1/30
60min 60min
16Bit 16BIt