APPLYING VISUAL EFFECTS (VISUAL EFFECT)
•
The visual effect function works only in Camera mode. ➥page 18
•
The visual effects enable you to give a creative look to your recording.
•
Select the appropriate visual effect for the type of picture that you wish to record
and the effect you wish to create. There are 10 visual effect modes.
1. Set the Select switch to TAPE. (VP-D395i only)
2. press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select "Camera", then press the
Joystick or move the Joystick ( ) to the right.
5. Move the Joystick (▲ / ▼) up or down to select "Visual Effect", then press
the Joystick.
•
The available options are listed.
6. Move the Joystick (▲ / ▼) up or down to select the desired visual effect option,
then press the Joystick.
•
The display mode is set to the selected mode.
7. To exit, press the MENU button.
).
CARD
TAPE
MODE
(VP-D395i only)
BATT .
Camera Mode
Camera
Camer
Off
Program AE
✔
White Balance
Art
Mosaic
Visual Effect
16:9 Wide
Sepia
Negative
Macro
DIS
Mirror
Mov
Move
Sele lect
Exi
Exit
MENU
STBY
STBY
SP
0:00:30
0:00:30
60min
60min
Ar
Art t
10Sec
10Sec
S
C.Nite 1/30
C.Nite 1/30
English _51
16Bit
16BIt