SETTING THE FILE NUMBER (FILE NO.)
•
File number setting works only in M.Cam mode.
•
File numbers are given to images in the order they were recorded when they are
stored on the memory card.
•
File numbers may be set as follows:
- "Series": When there are existing fi les, the new image will be named as the
next number in the sequence.
- "Reset": When there are no fi les stored on the memory card, the fi le numbering
starts from 0001.
1. Set the Select switch to CARD.
2. Press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear.
4. Move the Joystick (
Joystick.
5. Move the Joystick (
Joystick.
6. Move the Joystick (
or "Reset", then press the Joystick.
7. To exit, press the MENU button.
When you set "File No." to "Series", each fi le is assigned with a different number so as to avoid duplicating
fi le names. It is convenient when you want to manage your fi les on a PC.
▲
▼ )
/
up or down to select "Memory", then press the
▲
▼ )
/
up or down to select "File No.", then press the
▲
▼ )
/
up or down to select the desired option "Series"
➥
page 18
).
MODE
CARD
TAPE
BATT .
M.Cam Mode
Memory
Memory
File No.
Photo Quality
Super Fine
Series
Mov
Move
Sele lect
Exi
Exit
MENU
M.Cam Mode
Memory
Memory
File No.
✔
Series
Reset
Mov
Move
Sele lect
MENU
Exit
Exi
English _77