Self Record Using The Remote Control (Setting The Self Timer) (Vp-D375W(I)/D975W(I) Only); Vp-D375W(I)/D975W(I) - Samsung VP-D371i Owner's Instruction Manual

Digital video camcorder
Hide thumbs Also See for VP-D371i:
Table of Contents

Advertisement

ENGLISH
Basic Recording
Self Record using the Remote Control (Setting the
Self Timer) (VP-D375W(i)/D975W(i) only)
The SELF TIMER function works only in <Camera> mode.
page 19
When you use the SELF TIMER function on the remote control, the
recording begins automatically in 10 seconds.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Press the [SELF TIMER] button until the appropriate
indicator is displayed.
4. Press the [Start/Stop] button to start the timer.
SELF TIMER starts counting down from 10 with
a beep sound.
If you want to cancel the SELF TIMER function
before recording, press the [SELF TIMER]
button.
5. Press the [Start/Stop] button again when you wish
to stop recording.
[ Notes ]
Do not obstruct the remote control sensor by putting
obstacles between the remote control and
Camcorder.
The remote control range is 4 ~5m (13 ~17 ft).
The effective remote control angle is up to 30
degrees left /right from the centre line.
Using a tripod (not supplied) is recommended for
delayed recording.
38
38

VP-D375W(i)/D975W(i)

0
1
3
œ
4
5
<Camera>
0
1.
[Power]
2.
[Mode]
[TAPE]
3.
[SELF TIMER]
0
4.
[Start/Stop]
/
10
[SELF TIMER]
5.
[Start/Stop]
0
[
]
0
4 ~ 5
13 ~ 17
19
10
[CAMERA]0
0
0
0
0
/
0
/
30
0
0

Advertisement

Table of Contents
loading

Table of Contents