External Device Selection - Hitachi X200 Series Connection Manual

2

External Device Selection

Select the External Device to be connected to the Display.
Setup Items
Number of Devices/PLCs
Manufacturer
Series
Port
Use System Area
GP-Pro EX Device/PLC Connection Manual
Use an integer from 1 to 4 to enter the number of Devices/PLCs to connect to the
Display.
Select the manufacturer of the External Device to be connected. Select "Hitachi IES
Co., Ltd.".
Select a model (series) of the External Device to be connected and connection method.
Select "Inverter MODBUS RTU".
In System configuration, check to make sure the external device to which you are
connecting is supported in "Inverter MODBUS RTU".
"1 System Configuration" (page 3)
Select the Display port to be connected to the External Device.
Not available in this driver.
Setup Description
6
Inverter MODBUS RTU Driver