Hitachi X200 Series Connection Manual page 22

Setup Items
Timeout (s)
Retry
Wait To Send
Device Setting
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings]. Touch the
External Device you want to set from the displayed list, and touch [Device].
Setup Items
Device/PLC Name
Series
Slave address
GP-Pro EX Device/PLC Connection Manual
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the
response from the External Device.
In case of no response from the External Device, use an integer from "0 to 255" to enter how
many times the Display retransmits the command.
Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
Select the External Device to set. Device name is a title of the External Device set with GP-
Pro EX. (Initial value [PLC1])
Display the series of the External Device.
Use an integer from 1 to 247 to enter the address of the External Device.
Setup Description
Setup Description
22
Inverter MODBUS RTU Driver