Hitachi X200 Series Connection Manual page 14

External Device Settings
For External Device communication settings, use the FUNC key, Up key, Down key, and STR key located in the
keypad of the External Device.
Refer to your External Device manual for details.
1
Set OPE/485 switch to "485" position.
2
Turn ON the External Device.
3
Press FUNC key.
4
Press and hold Down key to display [C---].
5
Press FUNC key.
6
Press Up key to display the setting function code.
7
Press FUNC key.
8
Press Up key or Down key to select the setting value.
9
Press STR key.
10
Reboot the External Device.
Setting Value
Function Code
C071
C072
C074
C075
C078
A001
A002
GP-Pro EX Device/PLC Connection Manual
Setting Value
06 Communication speed selection
1. Node allocation
00 Communication parity selection
1 Communication stop bit selection
0. Communication wait time
03 Frequency source setting
03 Run command source setting
14
Inverter MODBUS RTU Driver
Setup Description