Setup Items - Hitachi X200 Series Connection Manual

4

Setup Items

Set up the Display's communication settings in GP Pro-EX or in the Display's offline mode.
The setting of each parameter must match that of the External Device.
"3 Communication Settings" (page 7)
4.1 Setup Items in GP Pro-EX
Communication Settings
To display the setup screen, from the [System Settings] workspace, select [Device/PLC].
Setup Items
SIO Type
Speed
Data Length
Parity
Stop Bit
Flow Control
GP-Pro EX Device/PLC Connection Manual
Select the SIO type to communicate with the External Device.
In the communication settings, set [SIO Type] correctly according to the serial interface
specifications of the Display.
If you select an SIO type that the serial interface does not support, proper operation cannot
be guaranteed.
Refer to your Display manual for details on the serial interface specifications.
Select communication speed between the External Device and the Display.
Display data length.
Select how to check parity.
Select stop bit length.
Select the communication control method to prevent overflow of transmission and
reception data.
Setup Description
19
Inverter MODBUS RTU Driver