Siemens SIMOTICS T-1FW6 Series Configuration Manual page 54

Mechanical properties
3.5 Service and inspection intervals
Note
If incorrect changes or corrective maintenance are carried out by you or a third party on the
contractual objects, then for these and the consequential damages, no claims can be made
against Siemens regarding personal injury or material damage.
Siemens service centers are available to answer any questions you may have. Siemens
Service Center addresses can be found at
http://www.siemens.com/automation/service&support
Sharp edges and falling objects
Sharp edges can cause cuts and falling objects can injure feet.
• Always wear safety shoes and safety gloves!
52
CAUTION
Naturally cooled 1FW6 built-in torque motors
Configuration Manual, 07/2017, 6SN1197-0AE01-0BP3