Table of Contents
Advertisement
Setting the Date and Time
The current date and time are shown in the display when the machine
is on and ready for use (Standby mode). The date and time are printed
on all faxes you send.
1. Press Menu, then press Date & Time on the one-touch keypad.
The display shows the currently set date and time.
2. Enter the correct date and time using the number keypad.
DD (Day)
= 01~31
MM (Month)
= 01~12
YY (Year)
= four digits (1990~2089)
HH (Hour)
= 00~23 (24 HOURS format)
= 01~12 (12 HOURS format)
MM (Minute)
= 00~59
AM (Ante Meridiem)
PM (Post Meridiem)
3. Press Enter when the date and time in the display is correct.
If you enter an invalid number, the machine beeps and doesnÕt
proceed to the next step. If this happens, just reenter the correct
number.
The display shows the date and time you have set, then returns to
Standby mode.
05-03-1999
08:36 (PM)
e.g. 12 HOURS format
05-03-1999
20:36
e.g. 24 HOURS format
Set Up Your Machine
1.23
Advertisement
Table of Contents
