Receiving Automatically In Ans/Fax Mode - Samsung SF-5800 User's Manual Setup And Operation

Receiving Automatically in ANS/FAX Mode

To use this mode, you must attach an answering machine to the
EXT.LINE jack on the back of your machine (see page 1.9).
1. Press Rcv.Mode until the display shows ÔANS/FAX.Õ
2. When you get a call, the answering machine answers it. If the caller
leaves a message, the answering machine stores the message normally.
If your machine hears a fax tone on the line, the fax receive mode is
activated.
Notes:
¥If you have set your machine to ANS/FAX mode and your answering machine
is switched off, or no answering machine is connected to the machine, the
machine will automatically go into fax receive mode after several rings.
¥If your answering machine has a Ôuser-selectable ring counterÕ, set the
machine to answer incoming calls within 4 ring.
¥If you are in TEL mode (manual reception) when the answering machine is
connected to your machine, you must switch off the answering machine, or
the outgoing message from the answering machine will interrupt your phone
conversation.
2.19
Receiving a Fax