Download
Share
Print this page
Samsung SF-5100 Technical Document
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Fax Machine
  5. SF 5100
  6. Technical document

Samsung SF-5100 Technical Document

Toner cartridges
Hide thumbs Also See for SF-5100:

Advertisement

Quick Links

Download this manual
Summit Laser Products - Samsung SF-5100 Toner Cartridges
Home
New Arrivals!
Samsung SF-5100 Toner Cartridges
DOC-0307
O
VERVIEW
First released in July 2001, Samsung SF-5100 fax machines are all based on the Samsung SF-5100 engine, which is a modified version
of the Samsung ML-1210. The SF-5100 runs at 6-8 ppm with a maximum resolution of 600 dpi.
The SF-5100 cartridge looks similar to the ML-1210 (Lexmark E210), but is different enough to warrant it's own separate instruction.
One very interesting thing is that although the cartridges are physically different, if a Samsung ML-1210 (Lexmark E210) machine is
modified as shown in the ML-1210 instructions, the SF-5100 cartridge can be tested in it. For some of the physical differences between
the cartridges, see Figure's 1 & 2. We will repeat the Lexmark E210 machine modification instructions at the end of this article.
FIGURE 1
As with the ML-1210 cartridges, these cartridges are unique in a number of different ways, the first is that the SF-5100 cartridge does
not have a wiper blade. The ML-1210 has a combination PCR cleaner and very flimsy wiper blade. The SF-5100 has the same PCR
cleaner but no blade. As these cartridges are designed to have a 100% transfer rate, this is not a problem. The used cartridges I have
seen have all had very clean PCR cleaners with no toner at all in the waste section. These cartridges do not have a drum cover, and
come new with a piece of heavy paper taped around the cartridge. (See Figure 3) The SF-5100 also does not use a seal. (All new
cartridges opened so far have shown some toner leakage that would have shown on any prints. Unlike the ML-1210, the SF-5100
cartridges do NOT have the "ONE WAY" security screws on the top cover.
http://www.summitechnologies.com/docs/0307/0307.asp
Company Info
Publications
overview
Required Tools
Required Supplies
Disassembly
Running Cleaning Page
Test Printing
Cleaning The Machine
Common Cartridge Problems
FIGURE 2
Special Features
Contact Us
Machine Error Codes
Printer Modification
Recommended Supplies
Page 1 of 11
4/21/2008

Advertisement

loading

Related Manuals for Samsung SF-5100

Summary of Contents for Samsung SF-5100

  • Page 1 PCR cleaners with no toner at all in the waste section. These cartridges do not have a drum cover, and come new with a piece of heavy paper taped around the cartridge. (See Figure 3) The SF-5100 also does not use a seal. (All new cartridges opened so far have shown some toner leakage that would have shown on any prints.

  • Page 2: Required Tools

    Page 2 of 11 FIGURE 3 The standard cartridge (Samsung part# SF-5100D1/TDR-510) comes new with 90g toner, and is rated for 3,000 pages at 4% coverage. Both are valid Samsung part numbers, the SF-5100D1 is the most current. The machines that are based on this engine are the following:...
  • Page 3 Summit Laser Products - Samsung SF-5100 Toner Cartridges Page 3 of 11 Place the cartridge with the handle facing up. Remove the 4 top corner screws. See Figure 4 Underneath the handle of the cartridge to the right and left, there are 2 plastic tabs GENTLY press them in, and lift the cover off.
  • Page 4 Summit Laser Products - Samsung SF-5100 Toner Cartridges Page 4 of 11 FIGURE 8 FIGURE 9 5. Remove the PCR. Figure 10 6. Clean the PCR with your normal PCR cleaner. WARNING: Do not clean the OEM PCR with alcohol, as this will remove the conductive coating on the roller.
  • Page 5 Summit Laser Products - Samsung SF-5100 Toner Cartridges Page 5 of 11 FIGURE 12 FIGURE 13 9. It is very important that the PCR cleaner be cleaned. Vacuum or blow off any residual toner from the foam/felt. 10. With the PCR Cleaner Assy. removed the drum can easily be removed by lifting it out. See Figure 14 11.
  • Page 6 Summit Laser Products - Samsung SF-5100 Toner Cartridges Page 6 of 11 FIGURE 16 FIGURE 17 15. Gently pry out the roller plate from the cartridge. The foam seal, and plastic flat washer will come out with it. Be careful not to damage the foam seal, or loose the flat washer. See Figure 18 16.
  • Page 7 Summit Laser Products - Samsung SF-5100 Toner Cartridges Page 7 of 11 FIGURE 20 FIGURE 21 21. Clean the conductive grease off the left side (Non Gear) end cap and replace with fresh grease. Replace the end cap and three screws. See Figure 22 22.
  • Page 8 Summit Laser Products - Samsung SF-5100 Toner Cartridges Page 8 of 11 FIGURE 24 FIGURE 25 25. Carefully snap the cover on making sure all the tabs lock in place. See Figure 26 26. Install the four screws in the top cover. See Figure 27 27.

  • Page 9: Cleaning The Machine

    The SF-530 version of these machines has the ability to run it’s own cleaning page. This may also work in the SF-5100 machines, but we were not able to confirm this. 1. Press the SETUP key on the front panel.

  • Page 10: Machine Error Codes

    RROR ODES As with most of the newer Samsung models, the error codes are all in English and are self-explanatory. The biggest problems you will run into are paper jams, and a dirty scanner. Keeping the machine clean with periodic maintenance will take care of most of them.
  • Page 11 Summit Laser Products - Samsung SF-5100 Toner Cartridges Page 11 of 11 © 2003 Summit Laser Products, Inc. Any attempt to reproduce any part of these instructions without the written consent of Summit Laser Products, Inc is prohibited. All registered trademarks are the property of their respective owners.