Table of Contents
Advertisement
Priority Transmission
When priority transmission is enabled, a high priority document can be
transmitted ahead of reserved operations. The document is scanned
into memory, then transmitted when the current operation concludes. In
addition, a priority transmission will interrupt a broadcast operation
between stations (i.e., when transmission to station A ends, before
transmission to station B begins) or between redial attempts.
1. Load the document face down. If necessary, adjust Resolution, or
Contrast. For details, see page 2.8.
2. Press Menu, then press Priority TX on the one-touch keypad.
3. Enter the number of the remote machine, then press Enter.
To enter the number you can also press a one-touch button.
Otherwise, press Speed/Status, enter a 2-digit speed dial number,
then press Enter. The stored number (and name) appears in the
display. Press Enter to confirm the number. Note that you can not use
Group dial number.
4. The display asks you to enter a name. If you want to assign a name
to the transmission, enter the name. If not, skip over this step.
For details on how to enter letters using the number keypad,
see page 2.4.
5. Press Enter. The display shows the number being dialed, then the
machine begins sending the document.
2.15
Sending a Fax
Advertisement
Table of Contents
