Setting The Date And Time - Samsung SF-555P User Manual

Laser facsimile
Hide thumbs Also See for SF-555P:
Table of Contents

Advertisement

Setting the Date and Time

The current date and time are shown on the display when the machine is
on and ready for use (Standby mode). The date and time are printed on
all transmitted faxes.
When you install the SF-555P for the first time, or when the product is
without power for about 15 seconds, the display prompts you to reset the
date and time.
1. Press Setup on the front panel. the display shows the first setup menu;
2. Press ➛ or ❿ until 'TIME/DATE SETUP' appears, then press
3. The display asks you to choose a date format. Press Start/Enter.
4. Press ➛ or ❿ until you find the desired date format, then press
5. Enter the correct date and time for each item using the number keypad.
6. When you are finished, press Start/Enter to save the setting. The
Getting Started
1.20
All manuals and user guides at all-guides.com
SET DATE & TIME
FAX NUMBER/NAME.
Start/Enter to access the Time/Date Setup menu.
Start/Enter.
If you select USA, the date appears in format of Month-Day-Year. The
EUROPE format will be displayed in format of Day-Month-Year.
The display shows the currently set date and time using the selected
date format and asks you to set the month.
04-01-2001 10:30
Each time you enter the appropriate number, the display asks you to
enter the next item in the following order: MONTH, DATE, YEAR, HOUR,
and MINUTE.
Enter the time in 24-hour format. For example, enter 2230 for 10:30
P.M.
If you enter an invalid number, the display does not proceed to the next
step. If this happens, re-enter the correct number.
display returns to Standby mode and shows the date and time you have
set.
19-MAR 12:30 FAX
(EUROPE Format)
(EUROPE Format)

Advertisement

Table of Contents
loading

Table of Contents