Making A Copy; Setting Date And Time - Samsung SF-360 Series User Manual

Making a copy

If you want to save ink while copying or receiving a fax, see "Copying/receiving in Ink Save mode" on page 1.8.
1
Turn the page face down and insert it into the document feeder.
Adjust the document guide to match the width of the docu-
2
ment.
3
Feed the document into the machine.
4 Adjust the resolution by pressing
5 Press .
Start Copy
• The display shows
Number of Copies
Enter the number of copies you want, and press
6
• The display shows
Zoom Rate
• If you want one copy without specific copy options, you can press
start immediately.
7
Select the zoom rate you want by pressing
• You can scale the document from 50% to 150% by selecting a pre-defined rate. The default rate is 97%.
8
Choose if you want to collate document.
• When collation is selected, you need to select the sorting order;
9
Press when all options have been selected.
OK
• When the machine runs out of paper,
.
OK

Setting date and time

The current date and time are shown in the display when the machine is on and ready for use (Standby Mode).
The date and time will be printed on all faxes you send.
1
Press .
Menu
2 Press buttons to choose
Scroll
3
Press when the display shows
OK
4 Press buttons to select either
Scroll
5
Press when the display shows
OK
6
Set the date and time. You can move the cursor by pressing
• If you enter an invalid number, the machine beeps and doesn't proceed to the next step. If this happens, just re-enter
the correct number.
• When entering the hour, you should enter it in 24-hour format.
7
Press when the date and time appear correctly.
OK
• The display shows the date and time you have set, then returns to Standby Mode.
1.6
.
Resolution
.
OK
.
buttons, and then press
Scroll
Load paper and press OK
SET DATE & TIME and press
Date Format
.
Europe(D-M-Y) or USA(M-D-Y)
Date & Time .
Document
Guide
.
again at this time, and copying will
Start Copy
.
OK
.
Normal, Reverse
appears in the display. Supply additional paper and press
.
OK
and press .
OK
buttons.
Scroll