Advertisement
Quick Links
Click here to view bookmarks.
Pneumatic Division
Richland, Michigan USA
www.parker.com/pneumatics
Bulletin Number
V203E
V222D
V225CP
V226D
V227D
V228CP
V241BP
V285EP
V287BP
V289CP
Safety Guide
Visit
www.pdnplu.com
additional instruction sheets.
C / CC / CW VALVE SERIES
Rev. 5
CJ1 & CWJ1 Valve, Installation & Service Instructions
Rev. 5
C2, C3, C3M1A, C4, C5, C9, C13, C92, C94, CW2,
CW3, CW3M1A, CW4, CW5, CW9, CW13, CW92, CW94 Valves,
Installation & Service Instructions
C10 & CW10 Valves, Installation & Service Instructions
C12 & CW12 Valves, Installation & Service Instructions
C6 & C7 Valves, Installation & Service Instructions
CS1 CWS1 Valves, Installation & Service Instructions
Flow Control for CC Valves, Installation & Service Instructions
Rev. 6
CCJ1-1S, CCA1-1S, CCC1-1S, CCJ11-1S, CCA11-1S, CCC11-1S Valves,
Installation & Service Instructions
CC10 & CC12 Valves, Installation & Service Instructions
CC2, CC3, CC3M1, CC4, CC5, CC6, CC7, CC9, CC13, CC92, CC94 Valves,
Installation & Service Instructions
PDN Safety Guide
for
Bulletin Description
(02/20/18)
Advertisement
Related Manuals for Parker CW Series
Summary of Contents for Parker CW Series
- Page 1 (02/20/18) Click here to view bookmarks. Pneumatic Division Richland, Michigan USA www.parker.com/pneumatics C / CC / CW VALVE SERIES Bulletin Number Bulletin Description V203E Rev. 5 CJ1 & CWJ1 Valve, Installation & Service Instructions V222D Rev. 5 C2, C3, C3M1A, C4, C5, C9, C13, C92, C94, CW2, CW3, CW3M1A, CW4, CW5, CW9, CW13, CW92, CW94 Valves, Installation &...
- Page 2 The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject Valve Operation: to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. These valves will operate mounted in any position; they are also suitable for vacuum service.
- Page 3 CJ1 & CWJ1 Series Valves V-203E Maintenance & Trouble Shooting Hints: Part Identification List Item # Description Noisy Solenoid: 1. Check voltage and hertz ratings of main electrical source. Valve Body Assembly This must agree with the solenoid rating. Valve Body 2.
- Page 4 The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Valve Operation EXTRA COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FOR INCLUSION These valves will operate mounted in any position;...
- Page 5 C-CW Series Valves V222D Cam Head Assembly Maintenance & Trouble Shooting Hints: Ball (C & CW2) PL2209 Air Leakage Through Exhaust Ports: Roller (C & CW13) PL2422 Heavy Duty Roller (Uni-Directional C & CW92) PL4030D 1. Check for internal leakage in cylinder being operated by Heavy Duty Roller (Bi-Directional C &...
- Page 6 The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Normally Normally...
- Page 7 C10 & CW10 Series Valves V-225CP The spool guide may be removed by pulling axially on the Service Kits Available radial holes drilled in the spool guide. Be careful not to scratch Valve Body Service Kit: the sealing surfaces or cut the seals. (consists of items # 3, 4, 5, 7, 8, 9, &...
- Page 8 A pilot pressure of 30 psig or more is recommended to operate to change by Parker Hannifin Corporation and its subsidiaries at any these valves. It does not need to be increased as line pressure time without notice.
- Page 9 C12 & CW12 Series Valves V-226D Service Kit and Parts Available Valve Body Service Kit: (consists of items # 3, 4, 5, 7, 8, & 12) PL505200 Valve Body Assemblies: C1225 (1/4" NPTF Ports) PL3265 C1237 (3/8" NPTF Ports) PL3266 CW1225 (1/4"...
- Page 10 Factory Pre-Lubrication - All valves are pre-lubricated at assembly The products described herein, including without limitation, product with a petroleum based grease. features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at CAUTION: any time without notice. This valve shall be used to actuate a punch press.
- Page 11 V-227D Service Procedures Part Identification List To disassemble unit, use the following procedure: Item # Description Remove fasteners anchoring foot base assembly. (The base Valve Body Assembly can be removed from the body by removing 4 pan head screws Valve Body using a Philips screwdriver.) To remove the stem, stem guide, Stem Retainer Snap Ring and seals from the body, unscrew the end plug using a 3/8"...
- Page 12 The products described herein, including without limitation, product compressed air systems only. features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any Series CS1 and CWS1 Series Valves can be operated either time without notice.
- Page 13 CS1 & CWS1 Series Valves V-228CP Port 01 Port 01 Port A Port A Port 0 Port 0 Port B Port B Port 02 Port 02 Series CWS1 Series CS1 Valve Body Service Kit Consisting of items: 1 thru 7 ........PL502800 Application At rest position (shown): Line pressure in Port 01 of CS1 Sequence valve.
- Page 14 Adjusting screws with fine threads have metering tapers designed Parker Hannifin Corporation and its subsidiaries at any time without notice. to give a wide range of control without extreme sensitivity.
- Page 15 The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any CCJ1 - Single Solenoid CCJ11 - Double Solenoid time without notice.
- Page 16 CCJ1-1S, CCA1-1S, CCC1-1S, CCJ11-1S, CCA11-1S, & CCC11-1S Series Valves V-285EP Service Procedure Maintenance & Trouble Shooting Hints Noisy Solenoid: Caution: Disconnect electrical supply to the unit. Shut off 1. Check voltage and hertz ratings of main electrical source. This air supply and exhaust pressure trapped within the unit must agree with the solenoid rating.
- Page 17 Maintenance Bulletin V-241BP for detailed information. features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any 3. Remote pilot pressure should be 30 to 150 PSIG (2.1 to 10 time without notice.
- Page 18 CC10 & CC12 Series Valves V-287BP 7. Install the stem guides (Items 4) to both ends. Install spring guide Valve Body Service Procedures / spool stop assembly (Item 6) to A-01 end (CC-10 only). 1. Turn off air supply and bleed off trapped pressure in the valve. Note: The larger of the two protruding hubs of the spring guide / 2.
- Page 19 Installation and Service Instructions Form V-289CP Pneumatic Division North America CC2, CC3, CC3M1, CC4, CC5, CC6, CC7, CC9, CC13, CC92, CC94 Richland, Michigan 49083 Pneumatic ISSUED: April, 2000 Supersedes: February, 1995 ECN# 27575 Air Leakage Through Exhaust Ports WARNING 1. Check center spool seals for nicked, cracked, peeled and / or delamination.
- Page 20 The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. CC3 Palm Button EXTRA COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FOR INCLUSION CC3M1 Large IN EQUIPMENT / MAINTENANCE MANUALS THAT UTILIZE THESE PRODUCTS.
- Page 21 1.4. Distribution: Provide a copy of this safety guide to each person that is responsible for selection, installation, or use of Valves, FRLs or Vacuum products. Do not select, or use Parker valves, FRLs or vacuum products without thoroughly reading and understanding this safety guide as well as the specific Parker publications for the products considered or selected.
- Page 22 Service Bulletin for the valve or FRL in question for the appropriate practices to service the unit in question. These Service and Installation Instructions are provided with every Parker valve and FRL sold, or are available by calling 1-800-CPARKER, or by accessing the Parker web site at www.parker.com.