Table of Contents
Advertisement
INSTALLATION PROCEDURE
[D]
15. Install the motor cover [A] (M4 x 6 pan head screw [B] and M4 x 6 screw
with spring washer [C]) and the bin bottom bracket [D] (truss head screw
[E] and double washer screw [F]) both packed with the 2nd sorter to the
1st sorter.
16. Install the joint bracket [G] packed with the 2nd sorter (flat head screw
[H]) on the relay unit [I].
17. Remove the front cover [J] (1 screw) and the rear cover [K] (2 screw) of
the relay unit.
18. Install the relay unit in the 1st sorter (2 M4 x 6 screws with spring washer).
19. Reinstall the rear cover [K] of the relay unit and the rear cover of the 1st
sorter.
[J]
30
[C]
[F]
6 March 1992
[A]
[B]
[E]
[G]
[I]
[H]
[K]
Advertisement
Table of Contents
