Ricoh ST23 Service Manual page 21

6 March 1992
2.10.2 Machine Operation in Jam Conditions
a. When a paper jam occurs in the copier, the sorter stapler stops after
delivering papers in the sorter to the appropriate bins.
b. When a paper jam occurs in the sorter stapler, the by-pass tray gate
motor energizes and papers in the copier are delivered to the by-pass
tray.
c. When a staple failure is detected, the machine stops staple operation.
2.10.3 Jam Reset
a. If a paper jam occurs at the diagonal transport unit, the jam condition is
reset when the diagonal transport door is closed after removing the
misfed paper.
b. If a paper jam occurs in the sorter, the jam condition is reset when the
vertical transport door or the horizontal transport door is closed after
removing the misfed paper.
c. If a staple failure occurs, the jam condition is reset when the sorter front
door is closed after removing the unstapled paper.
2.10.4 Jam Recovery
Copies on the bin are counted by the jam sensor.
When the start key is pressed after misfed paper is removed, the machine
delivers the copies from the continuance bin.
20
SECTIONAL DESCRIPTION