Ricoh ST23 Service Manual page 25

6 March 1992
[F]
[E]
[C]
11. Open the diagonal transport door [A] and remove the front cover [B] (2
screws) of the diagonal transport unit.
12. Set the connectors of the interface harness [C] from the copier to the
diagonal transport unit [D].
13. Fix the ground line [E] to the diagonal transport unit (M4 x 8 screw with a
star washer).
14. Hook the diagonal transport unit on the upper stay [F]. Then fix the unit to
the lower stay [G].
15. Install the lower by-pass tray [H].
[G]
24
INSTALLATION PROCEDURE
[H]
[D]
[A]
[B]