Ricoh ST23 Service Manual page 27

6 March 1992
[B]
[C]
21. Install the harness cover [A] (2 M4 x 6 screws).
22. Fix the ground line [B] of the diagonal transport unit (M4 x 8 with star
washer).
23. Install the front cover [C] of the diagonal transport unit (2 screws) and set
the front door [D].
24. Open the front door of the sorter, remove the staple cartridge cover [E],
and set the staple cartridge [F].
25. Put the two leveling shoes [G] under the feet. Confirm that the sorter is
parallel to the copier.
26. Turn on the main switch of the copier and test the operation of the sorter
stapler.
NOTE: The stapler will not staple for the first 10 or so copies until the
first staple from the cartridge reaches the proper position for
stapling.
[A]
[E]
[F]
26
INSTALLATION PROCEDURE
[D]
[G]