Toro Workman GTX Series Operator's Manual page 11

Parking-Brake Lever
The parking-brake lever is located on the control
panel (Figure 6).
Whenever you shut off the machine, engage the
parking brake to prevent the machine from accidentally
moving. If the machine is parked on a steep grade,
ensure that you engage the parking brake.
To engage the parking brake, pull the parking-brake
lever toward you (Figure
1. Parking-brake lever
To disengage the parking brake, push down the
button on top of the parking-brake lever, pull the
parking-brake lever toward you to release pressure,
and then push the parking-brake lever forward
8).
1. Parking-brake lever
7).
Figure 7
Figure 8
Direction Selector
The direction selector is located to the left of the
parking-brake lever. The direction selector has 3
positions: F
6).
Note:
The machine can be in any of the 3 positions,
but only moves in the F
positions.
Important:
changing direction.
Horn Button
International Models Only
The horn button is located on the control panel
6). Press the horn button to sound the horn.
Light Switch
Use the light switch
headlights. Push the light switch up to turn on the
g033923
headlights. Push the light switch down to turn off the
lights.
USB Power Point
The USB power point is located to the left of the
parking-brake lever
to power mobile devices.
(Figure
Important:
power point, insert the rubber plug to prevent
damage to the power point.
Key Switch
Use the key switch
machine.
The key switch has 2 positions: O
the key clockwise to the O
machine. When you stop the machine, rotate the key
counterclockwise to the O
machine. Remove the key whenever you leave the
g033924
machine.
11
, R , and N
ORWARD EVERSE
and R
ORWARD
Always stop the machine before
(Figure 6) to illuminate the
(Figure 6). Use the power point
When you are not using the USB
(Figure 6), to run and shut off the
N
position to operate the
N
position to shut off the
FF
(Figure
EUTRAL
EVERSE
(Figure
and O . Rotate
FF